IPv6 Address Expression and Examples Unlike the 32-bit with four 8-bit fields of IPv4 address, separated by dots; IPv6 processes a larger, 128-bit and uses colons to separate its 16-bit hexadecimal entries. Below explains how to shorten the IPv6 address: Lets use the IPv6 address: 2041:0000:130F:0000:0000:07C0:853A:140B. The Leading zeros in a field are optional. That means: the field 07C0 equals 7C0, and… Read More »
What is IPv6? IPv6 is the next generation of IP addressing or Internet Protocol. The previous version of IP addressing (IPv4) is depleted or near depletion. IPv6 was created by the Internet Engineering Task Force (IETF), a standards body, as a replacement to IPv4 in 1998. However, IPv6 is equipped with so much improved features and limitless opportunities more than… Read More »
What are IPv6 Routing Protocols? IPv6 (Internet Protocol version 6) routing protocols are next generation protocols that are essentially, components in the functioning of the IPv6 network layer.If you must know; routing protocols facilitate the exchange of routing information between routers, enabling them to make informed decisions about the best paths to reach various destinations in an IPv6… Read More »
Enabling IPv6 on Cisco Routers. As you must know; IPv6 is the latest version of the Internet Protocol (IP), which is the system that assigns unique IP addresses to devices and networks on the Internet. IPv6 was created to replace IPv4, which has a limited number of addresses and cannot support the growing number of connected devices. IPv6… Read More »
What Is DHCPv6 Autoconfiguration? DHCPv6 is a network protocol that works pretty much the same as DHCP in IPv4. It is used to assign IP addresses and prefixes to IPv6 hosts on a network. This is also known as a stateful autoconfiguration. How DHCPv6 Works. DHCPv6 works in two ways; Stateful and Stateless Address Autoconfiguration (SLAAC). Stateless Address Autoconfiguration (SLAAC) SLACC requires no… Read More »
